| Feature | HAML-RBH | HAML-RCH | HAML-RDH | HAML-HR10 |
|---|---|---|---|---|
| Application Focus | Continuous high-cycle industrial use | High-speed door systems | Ultra-high-speed door systems | Extreme torque & oversized door systems |
| Drive System | Direct-drive gearmotor | Direct-drive gearmotor | Direct-drive gearmotor | Direct-drive gearmotor (torque-boost) |
| Ideal For | Manufacturing & daily heavy traffic | Distribution & logistics | High-volume logistics & production | Large/heavy doors & extreme loads |
| Cycles per Day | Up to 5,000 | Up to 5,000 | Up to 5,000 | Up to 5,000 |
| Battery Backup | 50–200 cycles (door dependent) | 50–200 cycles (door dependent) | 50–200 cycles (door dependent) | 50–200 cycles (door dependent) |
| Attribute | Details |
|---|---|
| Mounting Options | Direct drive, left or right side configurable |
| Voltage Range | 115–575 VAC, 1-phase or 3-phase, 50/60 Hz |
| Cycle Capacity | Up to 5,000 cycles/day |
| Torque Output | 600–1200 in-lbs |
| Speed Range | 35–190 RPM (model dependent) |
| Operating Temperature | -40 °C to +50 °C |
| Battery Backup | 36 VDC backup with intelligent charging system and automatic switchover |
| Certifications | UL, ULC, CSA, UL 325 compliant (optional) |
| Feature | Description |
|---|---|
| Sealed Gearmotor Body | Designed for wet, abrasive, and corrosive environments |
| Washdown-Ready | Supports frequent cleaning cycles common in car washes and food facilities |
| Control Panel | NEMA 4 standard, NEMA 1/12 optional |
Engineered for harsh, wet, and high-duty environments, the sealed control module protects critical electronics from moisture, dust, and spray while maintaining stable performance and fast diagnostics. A gasketed housing and sealed cable interface help keep water out during washdowns and weather events, while the integrated LCD streamlines setup, status checks, and fault review at the door. Service-friendly connectors support quick swap-outs and upgrades without disturbing the enclosure seal, helping minimize downtime and keep cycles moving.
| Feature | Description |
|---|---|
| Motor | High-efficiency brushless system with sealed bearings |
| Drive | Direct-drive gearmotor for fewer wear components and smoother operation |
| Start/Stop | Programmable acceleration and braking for reduced door stress |
| Limits | Electronic (non-mechanical) position control |
| Memory | PositionTrak™ retains exact location during outages |
| Feature | Description |
|---|---|
| Controller | AlgorithmDrive™ adaptive response logic for consistent speed and torque |
| Diagnostics | Onboard status tracking with fault history and cycle counts |
| Calibration | Self-adjusting door profiling for repeatable performance |
| Networking | NetworkPower™ system supports up to 128 linked units |
| Compliance | UL325 compatible, photo-eye and edge ready |
| Application | Description |
|---|---|
| Car washes & wet environments | Sealed, washdown-ready design for frequent cleaning cycles |
| Cold storage & freezer doors | Reliable performance down to -40 °C |
| Parkades & high-traffic sites | High-cycle capability reduces service calls and downtime |
| Agriculture & livestock | Built to handle dust, moisture, and corrosive conditions |
| Industrial roll-ups & fabric doors | Smooth control for demanding open/close routines |
Download the 1-page HAML Operator specifications for engineering submittals and project planning.
📄 Download PDF
